*1 The length of printing or cutting is subject to the limitations of the program.
*2 ・Media type: Media specified by Roland DG Corp. ・Temperature: 25°C (77°F), humidity: 50% ・Roll media must be loaded correctly. ・Applicable when all pinch rollers available to the media width are used. ・Side margins: 25 mm or more for both the left and right margins ・Front margin: 35 mm or more ・Excluding expansion/contraction of the media ・Not assured when the print heater or dryer is used. ・All correction or adjustment function of this machine has been made properly.
*3 Print travel: 1m
*4 ・[PREFEED] menu item must be set to “ENABLE.” Range for assured repetition accuracy ・For media with a width exceeding 610 mm: Length 4,000 mm ・For media with a width of 610 mm or less: Length 8,000 mm
*5 ・Provided that media length is under 3,000 mm ・Excludes the effects of slanted movement and of expansion and contraction of the media.
*6 ・Data size:1,000 mm in the media-feed direction, 1,600 mm in the carriage-movement direction. ・No lamination ・Automatic detection of crop marks at 4 points when media is reloaded. ・During cutting, [PREFEED] menu item must be set to “ENABLE.” ・Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
*7 ・Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment. ・Depending on the ambient temperature and media width, the preset temperature may fail to be reached.
*Roland VersaWorks® is a 32-bit application, which runs on 64-bit Windows® with WoW64 (Windows 32-bit on Windows 64-bit).
*1 Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment.
Depending on the ambient temperature and media width, the preset temperature may fail to be reached.
*2 Be sure to connect the machine to an unshared electrical circuit.
Be sure to verify the amperage of the circuit breaker or fuse used.