Specifications DWX-52DCi
Cuttable material Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Glass fibre-reinforced resin, CoCr sinter metal
Loadable workpiece shape Disc-type (with step) Step section: 98.5 mm (3.88 in.) (diameter), height 10 mm (0.39 in.)
Body section: 95 mm (3.74 in.) (diameter), height max. 35 mm (1.38 in.)
Pin-type Pin diameter: 6 mm (0.24 in.)
Loadable workpiece weight 850 g or less
Number of adapters housed 6
Operating speed XYZ axis: 6 to 1800 mm/min. (0.24 to 70.9 in./min.)
Spindle motor Brushless DC Motor
Spindle rotating speed 6000 to 30000 rpm
Rotary axis travel angle A ±360°
B ±30°
Number of burs housed 15
Attachable bur Shank diameter 4 mm (0.16 in.)
Length 40 to 55 mm (1.57 to 2.17 in.)
Compatible compressed air   0.02 to 0.2 Mpa
Interface USB
Control command set RML-1, NC code
Power requirements AC 100 V to 240 V ±10 %, 50/60 Hz (overvoltage category II, IEC60664-1), 2.0 A
Power consumption Approx. 200 W
Operating noise During operation 70 dB (A) or less (when not cutting)
During standby 45 dB (A) or less
External dimensions 880 (W) × 660 (D) × 600 (H) mm (34.7 × 26 × 23.6 in.) (additional 150 mm depth required for extraction pipe)
Weight 105 kg (231.5 lb)
Installation environment Indoor use. Altitude: Up to 2000 m (6562 ft.), Temperature: 5 to 40 °C (41 to 104 °F), Humidity: 35 to 80 % (no condensation). Ambient pollution degree: 2 (as specified by IEC 60664-1). Short-term temporary overvoltage: 1440 V, Long-term temporary overvoltage: 490 V
Included items

 

Power cable, USB cable, Manuals, DGSHAPE Software Package CD, Detection pin, Automatic correction jig, Material adapters, Material adapter rack, Pin-type material adapter, Hexagonal driver, Spanner (for spindle), Milling bur holders, Milling bur positioner, Cleaning tool, Option adapter ID labels, Dust collection hoses, Dust collection hose adapter, Regulator, Cleaning brush, etc

Specifications, designs and dimensions listed may be subject to change without notice.

System requirements for USB connection
Operating system Windows® 10,8.1,7 (32-bit or 64-bit) or an upgraded computer originally preinstalled with Windows 7 or later
USB cable Use the included USB cable

 

Accessories
Item Model Description
Milling burs ZBD-100D R1.0 mm (ø 2 mm) Diamond Composite resin, Glass fibre-reinforced resin, high translucent Zirconia
ZDB-50D R0.5 mm (ø 1 mm)
ZBD-30D R0.3 mm (ø 0.6 mm)
ZCB-100D R1.0 mm (ø 2 mm) Non-coating Zirconia, Wax, PMMA, PEEK, Gypsum, CoCr sinter metal
ZCB-50D R0.5 mm (ø 1 mm)
ZCB-40D R0.4 mm (ø 0.8 mm)
ZRB-100D R1.0 mm (ø 2 mm) Milling bur for CA-MK1 (for DWX-52DCi/DWX-52DC/DWX-52D)
Pin-type material adapter ZV-52D Replacement pin-type material jig (for DWX-52DCi/DWX-52DC/DWX-52D)
Material adapter ZMA-52DC Replacement material adapter (for DWX-52DCi/DWX-52DC/DWX-52D)
Cleaning tool ZCT-4D Replacement cleaning tool (for DWX-52DCi/DWX-52DC/DWX-52D)
Milling bur holder ZBH-4D Replacement milling bur holder (for DWX-52DCi/DWX-52DC/DWX-52D/51D/50/4)
Spindle unit ZS-4D Replacement spindle unit (for DWX-52DCi/DWX-52DC/ DWX-52D/51D/4)
Collet ZC-4D Replacement collet (for DWX-52DCi/DWX-52DC/DWX-52D/51D/50/4)
Spindle belt ZSB-170 Replacement spindle belt (for DWX-52DCi/DWX-52DC/DWX-52D/51D)
Material adapters rack ZR-52D Replacement material adapters rack (for DWX-52DCi/DWX-52DC/DWX-52D)
Time reduction kit CA-MK1 Time reduction kit for model milling (for DWX-52DCi/DWX-52DC/DWX-52D)
CA-DK1 Time reduction kit for denture base milling (for DWX-52DCi/DWX-52DC/DWX-52D)
Options for Time reduction kit CA-52DC Replacement material adapter of time reduction kit (for DWX-52DCi/DWX-52DC/DWX-52D)
CA-DK1-FX Replacement fixture for CA-DK1 (for DWX-52DCi/DWX-52DC/DWX-52D)