DWX-52DC

May 3, 2017
dwx52dc_feat

dwx52dc_banner

Γενικά

Automated Dental Milling, Day and Night.

The ultimate in ease, material flexibility and unattended production, the DWX-52DC is designed to increase your laboratory’s productivity and profit. Featuring a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, the DWX-52DC gives users of all skill levels an exceptionally powerful, efficient and affordable dental restoration solution. Plus, its open architecture means it can be used with CAD/CAM software your technicians are already familiar with. Ideal for dental laboratories looking to boost their production capabilities.

Increased productivity and maximum versatility

2

The DWX-52DC is equipped with a 6-slot Automatic Disc Changer capable of loading 98.5mm discs of different (or the same) materials for continuous milling of numerous dental restoration jobs in succession. There’s also no need to stop milling to change discs or resend job data. Automated operation, in combination with its increased capacity, allows unattended milling of multiple materials or shades, throughout the day and overnight.

3

To minimise preparation work and time, the DWX-52DC is equipped with an Automatic Tool Changer which automatically replaces milling burs without needing to pause production. Up to 15 burs can be set up in the magazine for efficient milling of a wide range of materials, including zirconia, wax, PMMA, composite resin (in disc and block form*), PEEK, gypsum, CoCr sinter metal and fibre-reinforced resin.

* An included Pin-type Material Adapter enables setting up and milling of 7 pin-type materials consecutively.

Multiple device connectivity

For laboratories requiring greater production capacity, up to 4 DWX-52DC milling machines can be connected to 1 computer.
1

High quality, precision milling

4

A robust and steady ball screw-driven system mills high quality complex dental restorations. Simultaneously rotating and tilting discs through 5 axes of movement enables the milling of deep undercuts, large arch restorations and other full-mouth prosthetics. An air pressure system has also been added to automatically change the volume of air for the type of material being milled, eliminating air control errors during milling.

Easy to operate

5

Complex controls often associated with CNC milling have been replaced by a user-friendly Virtual Machine Panel (VPanel) which will automatically change used burs at the end of their life (Intelligent Tool Changer function), conduct machine diagnostics and give you one-touch machine calibration. A new cleaning function has been added to reduce post-production work by removing dust from the surface of milled materials such as zirconia. The DWX-52DC also features an integrated ioniser which reduces static build up, helping to reduce the cutting residue when working with materials such as PMMA.

Other convenient features include an LED status light which indicates machine status at a glance and a useful storage compartment for burs and other accessories.

6

Open architecture

The DWX-52DC gives you the freedom to work with your choice of the latest CAD/CAM software, scanners and materials. Users are not tied to a single manufacturer.

 

 

 

 

Τεχνικά Χαρακτηριστικά

Specifications DWX-52DC  
Cuttable material Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Fibre-reinforced resin, CoCr sinter metal
Loadable workpiece shape Step section 98.5 mm (diameter), height 10 mm
Body section 95 mm (diameter), height max. 35 mm
Pin diameter 6 mm
Loadable workpiece weight Up to 850 g
Number of adapters housed 6
Operating speed XYZ axis: 6 to 1,800 mm/min. (0.24 to 70.9 in./min.)
Spindle motor Brushless DC Motor
Spindle speed 6,000 to 30,000 rpm
Rotary axis travel angle A axis / B axis ± 360° / ±30°
Number of burs housed 15
Attachable bur Shank diameter: 4 mm, Length: 40 to 55 mm
Compatible compressed air* 0.2 MPa
Interface USB
Control command set RML-1, NC code
Power requirements AC 100 to 240 V ± 10 %, 50/60 Hz , 2.0 A (overvoltage category II, IEC 60664-1)
Power consumption Approx. 200 W
Operating noise During operation 70 dB (A) or less (when not cutting)
During standby 45 dB (A) or less
External dimensions Width x Depth x Height 880 (W) x 660 (D) x 600 (H) mm
Weight 105 kg
Installation environment Indoor use, Altitude Up to 2,000 m
Temperature 5 to 40°C
Humidity 35 to 80 % (no condensation)
Ambient pollution degree 2 (as specified by IEC 60664-1)
Short-term temporary overvoltage 1,440 V
Long-term temporary overvoltage 490 V
Included items Power cable, Power plug adapter, USB cable, Manuals, Roland DG Software Package CD, Detection pin, Automatic correction jig, Pin-type material adapter, Hexagonal driver, Spanner, Milling bur holders, Milling bur positioner, Dust collection hoses, Dust collection hose adapter, Regulator, Cleaning tool, Option adapter labels, Material adapters

 

System requirements for USB connection
Operating system Windows® 7/8/8.1/10 (32 or 64 bit)
Optical drive CD-ROM drive
USB Use the included USB cable

 

Options
Item Model Description
Milling burs ZBD-100D R1.0 mm (ø 2 mm) Diamong coating Composite resin, Fibre-reinforced resin
ZDB-50D R0.5 mm (ø 1 mm)
ZBD-30D R0.3 mm (ø 0.6 mm)
ZCB-100D R1.0 mm (ø 2 mm) Non-coating Zirconia, Wax, PMMA, PEEK, Gypsum, CoCr sinter metal
ZCB-50D R0.5 mm (ø 1 mm)
ZCB-40D R0.4 mm (ø 0.8 mm)
Pin-type material adapter ZV-52DC Pin-type material jig for replacement (for DWX-52DC)
Material adapter ZMA-52DC Material adapter for replacement (for DWX-52DC)
Cleaning tool ZCT-4D Cleaning tool for replacement (for DWX-52DC)
Milling bur holder ZBH-4D Milling bur holder for replacement (for DWX-52DC/51D/50/4)
Spindle unit ZS-4D Spindle unit for replacement (for DWX-52DC/51D/50/4)
Collet ZC-4D Collet for replacement (for DWX-52DC/51D/50/4)
Spindle belt ZSB-170 Spindle belt for replacement (for DWX-52DC/51D)
×
Any questions?